Видео

to fit the rod in place inside the window UNDO the thread all the way up with pliers so its hard to do back up, then insert in the hole and twist with Pliers, that rod will click and after just do the thread back up to required lenth

Hi, great tutorial although when go to the site from the link it says that it is a non crop window type. What is a non crop window? Thanks

Best tips on hinges😊

What would you use to break out windows when the espagnolettes ceased in lock position with minimal damage? Ive made window slices out of door latch slices but not amazing. Fed up of deglazing and having to bend the frames to break free. Thanks gents!

Hi, I need to fit a peephole into a UPVC door. Can you advise/show me a video please?

Lubly jubly 😊

Excellent demonstration, clear and precise. Thank you.

Could you show how to fit these into into the actual sash showing the type without the euro groove cover , thank you

You just saved me £140 for a locksmith...thanks!

Hi Mick no generally you will find the holes do not meet up with a different make of hinge so will require new fixing holes and also you need to note the step height of the door you are repairing as the hinge is made in different step heights

Very well explained.when replacing damaged hinges, are all the screw holes uniform to other hinges or will new holes have to be drilled. Also do you shim the hinges on the frame for different thickness sashes?

What can i say, first class information on how to adjust my door, the only hard bit was finding something to hold the door while i did the adjusting, thanks for the info.

Great video :) Would you happen to know what size the screw is at the end? Thanks

Very handy video. Thanks

I got these. Silver and gold. They look nice. Better than the obsolete slider chain which can be opened with a rubber band and some tape from the outside. They were really pathetic. Anyone can open them from the outside. My main concern is can these be opened from the outside with a piece of wire by an intruder????? I Don't think they're as secure as people think these are. I'd love to see a video of someone bypassing this chain and opening it from the outside with a piece of wire? Plus the screws that come in the pack are too small. You could boot them out of the wood.

I had thives in my house who stole the shash jammer lock but left the key. Is it possible to buy a new lock and key from you?

Our grandson just pulled the plate off our letterbox. I was hoping this video would show how to put it back on again.

Worst explanation ever 😂

How do you adjust these hinges

This video is useful. But I need an installation video, like the other ones you did for other hinges.

Excellent demonstration with clear warnings and tips. Thank you for sharing. Learned a lot from you.

Thankyou soo much. 🎉

Haven't tried it yet, but thank you so much for this video. I have tried another, to no avail - feeling confident this will work. Will try to remember to let you know.

What type of drill bit do you use for pvc doors?

Superb tutorial - you could not have explained it more clearly. Thank you.

Talented artist.

Thanks for the Vid. I'd be grateful for any tips on the easiest way to make space for an inline gearbox which has been cut for an offset gearbox? I did one with a drill and multitool but was a headache

You didn’t say how to fix opener to the frame

This has been a education , I am about to replace upvc panels on my door. This has been a great help.

I seem to be doing so many more multi point lock replacements, but of course we are now seeing to boom that started in the 90's of conservatories and porches, giving us gearboxes that are 20+ years old. I love looking at you very informative videos, but today's little gem has got to be that simple little jig that holds the gearbox steady whilst you dismantle the assembly. An absolute must for the van ! Thank you so much Regards Chris (Staffordshire)

What about gaskets which are 'welded in' and not removable? Any ideas anyone?

Hi. What's best...the double solid type as you have used, or one side solid and the other a spring? Kind regards

Hi I’m replacing the Safeway door gearbox I removed the screws to take it off the plate and silly me couldn’t remember ware the small screw came from can you help please regards John

Exactly what I was looking for!

Why not just use advice if it's just clipped on anyway

1) Put both screws in, leaving some play, & then tighten both up. Putting in the 1st screw tight & then turning the piece to line up for the 2nd screw will probably scratch the crap out of the plastic. 2) Use some PVC tape or a spacer so you only drill down the depth you need, not the depth of the drill bit! 3) And please use a small spirit level so it doesn't all look like 💩

Ive changed the gearbox so latches move in and out no problem... not the barrel lock wont turn ive lined it up properly i have bought another but same problem... help

Great tutorial, I'd also like to compliment your website. I've been shopping around for the correct items, and your website has the most size information and instruction which has made this process so much easier.

Very helpful thanks

Very informative video. Thank you so much for making this. Even right at the end, the screw recommendation is really helpful

This device can be overcome. The door handles are broken off outside and the handle spindles are hammered through so handles fall off on the inside ☹️ then the doors are crowbarred open.

My door frame has a crack in it, what's the best product to use to basically glue it or fill it? Cheers

Definitely a good lock. Unfortunately there's a specific lock pick set that defeats the magnetic feature. It's unlikely.any people other than a locksmith has these tools. Hopefully they can upgrade this nice lock. Thank you for sharing.🙏

Just had a new glazing unit installed but the fitter didn't check the mechanism, so they closed and locked the window and now it is jammed shut. replaced the handle to see if that was the problem, but seems either the lock box mech has jammed or the shoot bolts are stuck in the locked position. Little bit scared to remove the beads now

They used literally one little square inch of that packer on the bottoms only., and relied on the little felt gaskets to seal everything.. and charged 500 a window.. i can push the things in from the outside.. a good windstorm is going to tear my house apart now,. Bastards..

Just want to say thank you for this! It’s been a great help

If it's a fixed window that doesn't open should I put packers in all 4 corners?

When you say the door opens inwards, does that mean open into the house therefore pushing the door open? I need to replace a UCPC latch plate on my front door. The lock is on the right hand side and opens inwards. Standing from outside.

Not sufficient for split-spindle boxes

Brill thank you